Herco Light Commercial RO System (Up To 130lph)

£3,700.00 Incl. VAT

The Herco Light Commercial RO System is a compact, pre-assembled and easy-to-maintain solution for pure water production. Ideal for filling a water tank or IBC the system features a market leading controller with low voltage inputs for up to 2 float switches, able to fill an IBC in under 8 hours. Offering permeate flow rates of up to 130 litres per hour, a recovery rate of 50% and an average minimum rejection rate of 95% which are impressive stats for a unit of its size.

Product Features
  • Supplied pre-assembled ready for installation
  • High permeate flow of up to 130 litres per hour
  • Able to fill an IBC in under 8 hours
  • Integrated RO524 controller
What Is Included
The Herco Light Commercial RO system comes pre-assembled on a stainless steel mounting plate with everything you need to get started, including pre-filter, membrane, booster pump and market-leading RO524 controller. You also get several accessories including a pressure gauge and low-pressure switch to protect the integrated booster pump.
Installation Info
This system utilises a tapered 3/4″ BSP threaded feed water connection, with a DN10 flange for both the permeate and concentrate connections. The integrated booster pump and RO524 control panel require access to a standard power supply close to where the unit will be installed. For feed water and usage parameters, please refer to the table below.
Help & Advice
Need help or advice on which size to choose? No problem, drop us an email, start a live chat or give us a call on 01622 933 853 and we’ll be sure to help.

Add to Cart
Herco Light Commercial RO System (Up To 130lph)
£3,700.00 Incl. VAT
Herco Light Commercial RO System (Up To 130lph)
£3,700.00 Incl. VAT

HERCO LIGHT COMMERCIAL RO SYSTEM

Herco UO 130 Series RO

The Herco Light Commercial RO system is an excellent choice for space-sensitive pure water and desalination applications, measuring just 80cm wide, 36cm tall and 36cm deep – suitable for a permeate flow rate of up to 130 litres per hour. Boasting several advanced features including a low-pressure switch, solenoid valve to control automatic flush cycles and RO 524 control system which displays permeate conductivity, with options for forced stop and full tank. The controller also includes low-voltage inputs for up to 2 float switches, allowing for automated tank replenishment (such as filling an IBC).

How Long Do The Filters Last?
The carbon pre-filter should be changed after 100,000 litres or every 6 months, whichever comes first. The RO membrane should be replaced when you notice a drop in permeate production or water quality. With soft water, membranes can last up to 5 years however with extremely hard water and no pre-treatment, membrane lifespan can be reduced to 12 months or less.

Feed Water Parameters
To ensure optimal system performance the following feed water parameters should be met. As with all RO systems the permeate recovery and rejection figures depend on several factors such as feed water quality, temperature and the type of pre-treatment used. If your water hardness is over 100ppm a water softener should be used to prolong the life of the RO membrane.

Feed ParameterMeasurement
Maximum TDS1,000ppm
Conductivity1-99μS/cm
Temperature5-35°C (40°C Ambient)
Silt Density Index (SDI)< 3
Free ChlorineNot Detectable
pH Range3-11
Pressure3-6 Bar

Why Choose The Herco Light Commercial RO System?

  • Compact design for space-sensitive applications
  • Integrated control panel with conductivity meter
  • Suitable for desalination of softened water
  • Pressure switch and gauge for pump feed
  • Average recovery rate of 50%

Product Resources:
Herco UO130 Series Product Manual →
Herco UO130 Series Data Sheet →

Reverse Osmosis Solutions

We’re pleased to offer a comprehensive range of reverse osmosis solutions, from full systems to replacement membranes and accessories. Can’t find exactly what you’re looking for? Get in touch with a member of our team today.

Browse all Reverse Osmosis solutions →

Reverse Osmosis Solutions

Additional Information

Suitable For

Pure Water Production, Desalination
Boats & Caravans, Food & Beverage
Light Commercial, Manufacturing

Brand

Supplied With

Stainless Steel Mounting Plate
RO 524 Control Panel
10” Carbon Pre-Filter
4021 RO Membrane
High Pressure Pump
Low Pressure Switch
Pressure Gauge

Dimensions

Height 360mm
Width 800mm
Depth 360mm

Permeate Flow

130 Litres Per Hour

Voltage

230 V/50Hz

Average Rejection Rate

Minimum 95%

Recovery Rate

50%

Maximum TDS

1,000 mg/l

Water Temperature

Up To 35°C (Ambient 40°C)

Max Pressure

10 Bar (Operating Pressure)
3-6 Bar (Feed Water Pressure)

Connections

Permeate/Concentrate: DN10
Feed Water: R 3/4" BSP

Conductivity

1 – 99 μS/cm

pH Range

3-11

Weight

31kg